Best Steelwork Manufacturer Springfield Near Me

Tim Garton: Quality work and professional craftsmanship!

LG5150: I bought some "AR500" plates there for target practice. I shoot a lot! I shoot my 9mm and its fine. Shoot my AK47 (7.62x39) and it leaves a dent. I pulled out my AR15 (5.56 nato) and it went through the metal. I have had issues with bullet fragments coming back to me at 25 yards and hitting me. Once in the chest, (went through my shirt) and once in my man sack, (right through my pants and into my nut sack). I don't recommend them for shooting plates.

Brian Miller: Fair prices on steel and helpful staff.

harvamatic keeping it real since 82: I can't say much bout their business but I'm working on their roof

Mista D: Been sitting for two hour already. They’re just driving forklifts back and forth.

Brandon Sidney: Can't get a hold of salesman main lady is nice tho

Michael Woodson: I will be working there .

Josh Mansel: Good folks in the office

Doug Renshaw: Great place to work with. Very helpful staff and quick service!

Travis Lindemoen: The Worst customer service I've ever seen. I would never work with this company again in buying steel material

Diane Pyatt: Excellent owner ! 100% satisfied customer service. Employees are experts @ the job. Nice property grounds with organized supplies. Highly recommend this company over any company in USA

Tim Speaks: Some of their employees are independent contractors working in Watson's shop. Take it for what it is.

Tay'sFishinMission: Great place and people!!!!

Sam Vickers: Great people to do business with. Very helpful with information I needed

Hippo: Dropped some pieces off to get worked on. Was told by jim he “couldn’t get to it this week but will next week”.I called two weeks later after not hearing a thing. “It’s Thursday so we won’t get to it this week, but I might get on it next week.”I swing by the shop the next Wednesday midday. My pieces were sitting in the exact place I left them when dropping them off 3 weeks prior. I grab them and walked out, Jim not making a noise or attempt to stop/apologize/make an excuse.I can’t comment on the quality of work but I definitely won’t be going back. Safe yourself some time and go to Rose Metal over on Division, they finished the pieces in less than a day.

benno steinmetz: Very pleasant and helpful to a novice needing a small order.Recommended highly.

Ray Cook: Used to love coming here. After telling Big Boy what I was needed he sent me into shop to look for pieces. After searching small pieces finally found the size that I was needing. But come to find out after my 30 minutes of searching it was not cold rolled and it would be tomorrow before they could cut any cold rolled down.

bob bennett: Left Locke supply because they were so rude. This place was awesome. Has it ready when I pulled up. No testing me like I owed then for being a customer

Maxracer 1966: Very rude poor communication act like they dont want to be bothered wouldnt refer anyone to this place of business!

Ashley Johnson: Love Midwest Sheet metal. They help our business with all our metal needs. Jim is the sweetest!!!!

Blake Hooten: They can't do math to save their lives. 5x3 is 27...

steamy sloth777: Very bad customer service. I asked them to do something the first time and went to go pick up the finished product. On arrival the fat guy asked how i wanted to pay for the product. I asked him if i could at least see the finished product before buying it. He huffed and puffed since he is very overweight and opened the door to the back of the office and pointed at the finished product. I then asked him if i could get hands on the product before I bought it and he said "sure go look at it". I found that the work I had asked to be done was not done correctly so i called him over from 50ft away. he was winded from the 50ft walk and on his arrival I questioned why the work I asked to be done wasn't done. He began to make excuses stating that I didn't explain it correctly to him. I explained to him that the metal edges were not completely folded over like I had requested and instead they were folded at a 90 degree angle. He then again blamed me and said it was going to cost me more money to get the metal folded over flat at a 180 degree angle. I told him if he would have done it right the first time there would be no problem with the finished product. Usually a company will have excellent customer service and not try to sell you a product that they messed up and try to fix the situation for the customer. Not this company. If I hadn't of asked to see the finished product before hand, I would have been screwed. What kind of company tries to sell you a product and doesn't even want you to look at it before purchasing it. I bet money if the obese guy who works in the front office somehow didn't work there anymore, there business sales would go up and the customer service satisfaction would be much better. We'll just have to see about the fat man who is a master at blame shifting the problem onto the customer.

Nathan Dannen: Very rude. Cursing at customer over the phone, clearly doesn't need any more business.

Andrew Hill: Great place if your looking for having any kind of metal work done

Michael Brennan: Awesome people here!!! Debbie, Amanda and Bobby are especially amazing people!!!

Dirk Fisher: RMP exceeded my expectations in price and quality. My project was ready ahead of schedule and I am thrilled with the brass cutouts they did for me!

C: Horrible customer service.. don’t call if you aren’t ready to be treated poorly

Noah Schnelle: Great customer service

Betsy A Fruin: Always a pleasure doing business with RMP. I've called on them several times in the past few months. Each job was as ordered, and production was as expected (only one of the 4 jobs was behind schedule - a miscommunication). Even though a job was behind once we got the communication straight, it was done (complete) within the week. Great quality of workmanship. I highly recommend dealing with Art or Jim in their sales team!

David Diebel: This is the best place I've ever worked, it's like any place you work there's good and bad,but with a positive attitude you choose to see more good than bad.Everyone is very knowledgeable and professional, and yes we sometimes make mistakes with material but we always try and make it right. I love helping the customer get what they came for. Wiley, Jim ,David and Johnny are top notch and i'll work here till I retire or the Lord takes me home.

Heather Carpenter: A terrible place to work for.

Daten Boswell: I’m a knife maker and i first found them on amazon, so glad i did. the steel i get from them is always excellent quality. I ordered the same steel from another seller, it was warped terrible. Every time i buy from RMP im very happy with the product.

David Pierce: Had my wife's 1968 Camaro subframe and suspension components powder coated. Wow! Been to a lot of powder coating places in Springfield for my hot rod restorations. This is the best work to date. They did top notch prep work on the bare metal and the coating looks great. Who knew they did powder coating. Great set up and friendly staff. Front office is top notch.Thanks Missouri Sandblasting for referring me to RMP.

Weldor ,: Herb always takes care of anything our shop needs and in the same professional way we demand . Been using them a LONG time . They’ve been around where others have disappointed and disappeared. You know what they say “ Get what you pay for”.

Jake Colvin: I nearly had a problem with service and then a member of management completely took charge of the situation and solved my issue I couldn't be more pleased with their professionalism and the quality of the product I received

James Allen: Material was delivered as promised and was of high quality

Robert Brittain: Worst Customer experience I have had here. The material people didnt have any knowledge at all. Said they never carried the stainless steel rods I needed, yet I have been having them cut there for years. Will never go there again

Rusch Creek LLC: Ordered thread plate aluminum for my boat. All material was packed very well and showed up with no damage. They shipped quickly and did not have any problems. Thanks for the great product.

Gile Beguiled: Best metal guys around! Helped us with everything we needed and did a great job.

Corvus Moon Pottery: Always willing to help the little guy - I have used Rose for many obscure and small projects and they have ALWAYS been courteous and fast in helping me. Their prices are right there with industry standards and I have never been dissatisfied with their service.

KELI C: HORRIBLE. If you could choose no stars that's what I'd pick. We were told we would receive a call twice and did not. Order was not correct. Jim has stuff going on in his personal life that is affecting his work and told us he doesn't care. Not professional at all. I called and tried to get the situation resolved and got hung up on. I then called back and am still waiting for a call back and it has been over a week. Can't believe they at all in business. Will never return or recommend.

Tom Cravens: I've used Rose Metal Products to manufacture many different parts for my businesses over the years. Consistent high-quality and accuracy keeps me coming back!

Ronald Woody: For the second time I have waited for days to get a quote on some material. When I finally get it, it is for over twice what quotes are from other companies. The last time I talked to the owner, but only got poor excuses.

Mark Mareth: Good quality quick. Can make anything